Your Best Choice for AC Heat Pump and Furnace Repair in Avon, IN

Tune up Rheem Heat pump

I recently completed a furnace tune-up for a customer in th area. The customer had been experiencing some issues with their furnace, such as uneven heating and a lack of hot air. I arrived at the customer's home and performed a thorough inspection of the furnace. I checked the thermostat, the blower, the air filter, and the combustion chamber. I also checked the gas pressure and the ignition system. After completing the inspection, I cleaned the furnace and replaced the air filter. I also adjusted the thermostat to ensure that the furnace was running at the correct temperature. The customer was very satisfied with the work that I performed and expressed that the furnace was now running much more efficiently.

I was hired to perform an annual tune-up and inspection on a Rheem heating and cooling system. The system was installed in a residential home and had not been serviced in over two years. During the inspection, I checked the electrical connections, inspected the heat exchanger, and tested the refrigerant pressure. I also cleaned the air filter and replaced the air filter if necessary. Finally, I performed a safety check to ensure that the system was operating safely.

I was called to a home in the middle of winter to repair a Lennox furnace with a bad exchanger. The furnace was not producing heat, and the customer was concerned about the safety of their home. I arrived at the house and diagnosed the problem as a bad exchanger. I removed the old exchanger and installed a new one, and the furnace was back up and running in no time. The customer was very happy with the service, and I was able to get them back to a comfortable temperature in their home.

I was called to a home in the suburbs to perform a furnace tune-up and inspection. The homeowner had noticed that their furnace had been running less efficiently than usual and wanted to ensure that it was still in good working condition. Upon arrival, I performed a thorough inspection of the furnace, including checking the burners, ignition system, and blower motor. I also checked the thermostat and air filter to ensure that they were clean and functioning properly. After the inspection, I performed a tune-up on the furnace, including cleaning the burners, adjusting the ignition system, and lubricating the blower motor. I also checked the safety controls and gas pressure to ensure that they were working correctly. Finally, I provided the homeowner with a detailed report of the inspection and tune-up, and made recommendations for any additional maintenance that may be needed in the future. The homeowner was very pleased with the service and thanked me for my help. I was happy to be

I am a skilled professional that works for A Perfect Climate Heating & Cooling. I recently completed a job for a customer who needed a tune-up on their Grand Aire 80% gas furnace. The furnace wand had not been serviced in a while. During the tune-up, I checked the furnace's electrical connections, cleaned the burners, inspected the blower motor, and adjusted the gas pressure. I also replaced the air filter and checked the thermostat to ensure it was working properly. After the tune-up, the customer noticed a significant improvement in the furnace's performance. The furnace was now heating their home more efficiently and quietly. They were also happy to know that their furnace was now more energy-efficient, which would help them save money on their heating bills. Overall, the tune-up was a successful job, and the customer was happy with the results. I am proud of the work that I do and the impact that I can have on my customers' homes.

I was called to repair a drain that had become cracked and gummed up. After inspecting the drain, I determined that the issue was caused by a buildup of grease and debris. I removed the drain cover and used a specialized tool to clean out the debris. I then replaced the drain cover and tested the drain to ensure it was working properly. The customer was very satisfied with the work and thanked me for my help.

Today, i was scheduled to a customer's home for their Goodman Heat pump and it needed a drain repair and flush to clear out the back up and pooling of water.

Bryant heat pump system not heating and cooling found issue and resolved same day in Avon Indiana

I was called to a home to repair a Lennox heat pump that was not cooling. I found that the system had a refrigerant leak and needed to be recharged. After recharging the system, the heat pump was cooling again. The customer was happy with the service and thanked me for my help.

Board replacement

I was called to a home to repair a heat pump that was not cooling the air. I found that the air handler was not getting power. I checked the power supply and found that the circuit breaker had tripped. I reset the breaker and the air handler came back on. The customer was happy to have their air conditioner working again.

I performed a tune up to the air conditioner of a customer's home. I used a vacuum cleaner to remove dirt and debris from the air filter and the interior of the unit. I also cleaned the condenser coil and checked the refrigerant levels.

New HVAC install. Installed new Rheem furnace and heat pump.

Ice bound. No cool. Bryant

No cool. Fan motor failing.

New HVAC install. Installed new GrandAire ac and coil.

No cool on trane ac

Trane repair

Furnace tune up

Ac repair

Gree repair

Cleaning on heil ac

Cleaning on rheem ac

Service call geo thermal system

Carrier tune up

Installed rheem 50 gallon water heater

Cleaning on high efficiency rheem ac

Maintenance ac/hp. 1988 r22 Trane weathertron heat pump.

Cleaning on Payne ac

No cool on Bryant heat pump

Service call

Performed cleaning/tuneup on carrier ac

American standard ac tune up

Carrier ac tune up

Gree tune up

Carrier furnace tune up

No cool. Electric heat on with ac.

No heat pump. Short and bad tstat. Carrier

Tuneup on heatpump system

Warranty replacement call. Replaced Richmond water heater with warranty one.

New HVAC install. Installed new Rheem 80% gas furnace.

Metal transition repair

No heat call. Performed service on Trane furnace