Your Best Choice for AC Heat Pump and Furnace Repair in Indianapolis, IN (4)

I replaced a fuse with a popper fuse and a new thermostat in an old maratherm system. The old thermostat was repalac ed with power on it and it blew the fuse inside. The furnace

I was called to a home to check on a heat pump that was not working properly. The customer had already called another HVAC company and they were unable to fix the issue. I arrived at the home and performed a thorough inspection of the heat pump. I found that the compressor was not working properly and needed to be replaced. I have left an estimate on replacement due to age and cost of repair. The customer was very happy with the work and thanked me for my knowledge.

Fall seasonal Tune up on old Amana furnace. Inspected the heat exchanger. Indianapolis Indiana

I was called to a home to perform a fall tuneup on a Heil furnace. Full inspection with heat exchanger scope!

I performed a fall heat inspection on a rheem heat pump system.

I was called to a home in the suburbs to perform a routine maintenance check on a new heat pump. The homeowner had recently purchased the unit and wanted to ensure it was operating properly. Upon arrival, I inspected the unit's electrical connections, inspected the refrigerant levels, and tested the unit's performance. I also checked the unit's filters and cleaned them if necessary. After completing the inspection, I provided the homeowner with a detailed report of my findings and recommendations for any necessary repairs or maintenance. The homeowner was pleased with the service and expressed satisfaction with the performance of the heat pump. I also provided the homeowner with a maintenance agreement that included regular maintenance checks and discounts on any future repairs or maintenance services. The homeowner agreed to the agreement and signed it. Overall, the job was completed successfully, and the homeowner was happy with the results.

I was called to inspect and tune up an air handler in a residential home. The unit was over 10 years old and had not been serviced in a while. I inspected the unit and found that the blower motor was not working properly. I replaced the motor and tested the unit to ensure it was working properly. I also cleaned the unit and replaced the air filter. The customer was very happy with the work and thanked me for my help.

New Rheem airhandler inspection and tune up

I recently completed a job at an HVAC contractor company where we were called to inspect and tune up a 2003 Trane air handler. The unit was located in a commercial building and had been experiencing some issues with temperature control. Upon arrival, I performed a thorough inspection of the unit, checking for any signs of damage or wear. I also tested the electrical components and the refrigerant levels to ensure they were functioning properly. After the inspection, I performed a tune-up on the unit, which involved cleaning the coils, checking the fan motor, and adjusting the thermostat. I also replaced the air filter to ensure optimal airflow. The customer was very pleased with the results of the tune-up, and we were able to resolve the temperature control issues that had been affecting their business. Overall, it was a successful job that demonstrated our commitment to providing quality HVAC services to our clients.

I recently completed an inspection and tune-up on a Rheem heat pump system. The system was installed in a residential home and had been experiencing some issues with cooling and heating. During the inspection, I checked the refrigerant levels, inspected the compressor, and cleaned the evaporator and condenser coils. I also checked the thermostat and made any necessary adjustments. After the tune-up, the system was running smoothly and efficiently. The homeowner was happy with the results and expressed satisfaction with the service. Overall, it was a successful job that helped the homeowner improve the performance of their heat pump system.

Performed Seasonal safety inspection on rheem heat pump

I was hired to perform seasonal cleaning on a Trane heat pump system. The system was installed in a residential home and had not been cleaned in several years. The cleaning process involved removing the exterior cover, cleaning the coils, and cleaning the fan motor. I also cleaned the air handler and evaporator coil. After the cleaning, the system was tested to ensure it was operating properly.

I was called to inspect and tune up a Trane air handler at a residential home. The unit was not operating properly, and the customer was experiencing issues with temperature control. Upon arrival, I performed a thorough inspection of the unit, including checking the electrical connections, refrigerant levels, and airflow. I also cleaned the coils and inspected the blower motor and fan blades for any signs of damage. After the inspection, I performed the necessary tune-up procedures to ensure the unit was operating at peak efficiency. This included adjusting the thermostat settings, lubricating the moving parts, and cleaning the air filter. The customer was pleased with the results and expressed gratitude for the prompt and professional service. I also provided them with tips on how to maintain their air handler in the future to prevent future issues. Overall, this was a successful job that helped the customer resolve their temperature control issues and maintain the efficiency of t

I recently completed a Rheem heat pump inspection and tune-up for a customer in the area. The heat pump was installed in the customer's home about 10 years ago and had been experiencing some issues with performance. During the inspection, I found that the heat pump was not producing enough heat and was not cooling the home effectively. I also noticed that the unit was leaking refrigerant, which can be dangerous and cause damage to the environment. To address these issues, I performed a thorough tune-up on the heat pump, including cleaning the coils, checking the refrigerant levels, and adjusting the thermostat. I also replaced the air filter and checked the electrical connections to ensure that everything was working properly. After the tune-up, the customer noticed a significant improvement in the performance of their heat pump. They were able to control the temperature of their home more effectively and save on their energy bills. Overall, the Rheem heat pump inspection and tune-

Performed heating inspection on rheem heat pump system in Carmel Indiana

I was at the customers home today as a part of their yearly maintenance agreement/tune up on their Lennox furnace for the winter season ahead!

Today we installed a new Rheem heat pump system.

No cool call. Performed service on Rheem ac.

I recently completed a Rheem 95% gas furnace tune-up. This tune-up involved inspecting and adjusting the furnace's components to ensure optimal performance and efficiency. I cleaned the burners, inspected the gas pressure, and tested the thermostat. I also checked the blower motor and inspected the electrical connections. Finally, I performed a combustion analysis to ensure that the furnace was burning fuel efficiently.

New HVAC install. Installed new Rheem gas furnace.

I am a highly skilled HVAC contractor professional who specializes in repairing and maintaining Trane air conditioners. I have extensive experience in diagnosing and repairing all types of Trane air conditioners, including central air conditioners, heat pumps, and packaged units. I use the latest tools and techniques to ensure that your Trane air conditioner is running efficiently and effectively. I also offer preventative maintenance services to help keep your Trane air conditioner running smoothly and prevent costly repairs. If you are experiencing problems with your Trane air conditioner, I encourage you to contact me for a free estimate.

Fall seasonal safety inspection on heil furnace

I was tasked with replacing the belt on a carrier rooftop unit. The unit was located on the roof of a commercial building. I had to remove the old belt and install the new one. This involved removing the access panel, disconnecting the electrical connections, and removing the old belt. I then installed the new belt and reconnected the electrical connections. I also checked the belt tension and adjusted it as needed. Finally, I cleaned the area and replaced the access panel.

Customer had an unfortunate house flood and their flooring needed to be replaced. Today we Uninstalled Rheem air handler and reinstalled the rheem air handler.

I recently completed a job for a customer who needed a furnace tune-up and inspection. The furnace was over 10 years old and had not been serviced in several years. During the tune-up, I checked the furnace's electrical connections, inspected the burners, inspected the heat exchanger, and checked the airflow. I also cleaned the blower wheel and inspected the venting system. After the tune-up, I provided the customer with a detailed report of my findings and recommendations for any necessary repairs or maintenance. The customer was very pleased with the service and decided to have the repairs completed. Overall, the furnace tune-up and inspection was a successful job that helped the customer avoid costly repairs in the future.

I recently completed an HVAC repair and tune-up job for a customer in the area. The job involved inspecting and repairing the heating and cooling system, including replacing the air filter, cleaning the coils, and checking the thermostat. I also performed a safety inspection to ensure the system was operating safely. The customer was very satisfied with the work and expressed gratitude for the prompt and professional service.

I am a highly skilled HVAC contractor professional. I recently completed a furnace tune-up and cleaning for a client in the area. The furnace was over ten years old and had not been serviced in a while. I arrived at the client's home and performed a thorough inspection of the furnace. I checked the burners, ignition, and other components to ensure they were working properly. I also cleaned the furnace's interior and exterior, removing any dirt or debris that could affect its performance. After the tune-up, I performed a smoke test to ensure the furnace was operating safely. The client was very pleased with the results and expressed satisfaction with my work. I am proud of the work I performed and look forward to completing more jobs in the future.

Ew HVAC install. Installed new Rheem air handler and heat pump.

Goodman air conditioner not cooling. Solved the customers issue and ac was up and running for quick speedy service

I was called to a home to perform an AC tune-up and maintenance. The homeowner complained that their AC unit wasn't cooling their home as well as it should. I arrived at the home and performed a thorough inspection of the AC unit. I checked the refrigerant levels, cleaned the air filters, and checked the electrical connections. I also checked the condenser and evaporator coils for any signs of damage or wear. After completing the inspection, I recommended that the homeowner replace the air filters and schedule a professional tune-up for the AC unit. The homeowner agreed to the recommendations and scheduled the tune-up for the following week.

Air conditioner not cooling and customer needed us to come out same day for emergency service in Indianapolis, Indiana

Bryant air conditioner not working house is hot not cooling

AC tune up. Performed maintenance on Rheem air conditioner.

I recently completed a job installing a new rheem gas furnace for a customer. The furnace was a high-efficiency model that provided excellent heating and cooling performance. I started by removing the old furnace and disposing of it properly. Then, I installed the new furnace, ensuring that it was properly connected to the gas line and electrical supply. I also made sure that the ductwork was properly installed and sealed to ensure optimal airflow throughout the home. Finally, I tested the furnace to ensure that it was operating correctly and that the temperature was set to the customer's preferences. Overall, the job was completed on time and to the customer's satisfaction.

I recently completed the installation of a new rheem gas furnace for a customer in the area. The furnace was installed in a residential home and was a replacement for an older model. The installation process involved removing the old furnace and venting system, installing the new furnace and venting system, and connecting the furnace to the gas line. The installation was completed in a timely manner and the customer was satisfied with the results.

New HVAC install. Installed new Rheem gas furnace.

I was called to repair a Trane AC unit. The customer complained that the unit was not cooling the house properly. I arrived at the house and found that the unit was low on refrigerant. I added more refrigerant and tested the unit to ensure it was cooling properly. The customer was happy with the results and paid me for the service.

Replacement of Control board on a Goodman due to a blower fault.

Goodman air condition repair

rheem air conditioner repair

Rheem ac repair

Heat pump repair

repair was needed today on grandaire air conditioner

I repaired a heat pump for a customer.

Ac repair